Dremel Reviews 

This tool Drexel 3000 is of poor design. Everything about tool seems quality until you change bits. The stop design doesn't work. Therefore after 3 uses of the tool and I can't remove the bit Therefore the tool is now trash worthy. This brand is a complete waste of money and a waste of your time for any type of work.

Purchase made for Dremel 3000 in July 2024 and after just few months and two times using it, and it stopped working completely dead , I didn't happen to keep hold of my receipt, but I did register it on the App and when I produced paperwork for registration they wouldn't do anything for me without a proof of purchase receipt!! I believe what started off as a great product/company through bosch has now gone thoroughly down hill in the quality product build areas and the entire thing is a huge scam, " Never again "

Brilliant tool clean my feet with it and give myself a manicure

Didn't expect my new Dremel 3000 to stop working so soon on first outing. Cutting a thin piece if rubber it quit. Fuse is good and bushes too. Awful experience, never again. Shame it's sat in a cupboard for a year before use and lost receipt.

Bought a Dremel 3D printer, it worked perfect for 5 uses. It stopped working for no apparent reason. Now they want £300 to repair it. Its still in warrenty! Awful Shocking customer service too, took me 3 days of contacting Bosch before they could tell me who I need to contact.

A friend of mine has an old Dremel rotary grinder which has never let him down . I was considering purchasing one but after reading all the One Star reviews I will definitely be avoiding Dremel . Thank you everyone who have bothered to write in with your negative experiences .

Dremel 4250 mains rotary tool. I’m now on my third machine since Feb this year. First one lasted until April then just stopped working. Refunded after tooing and froing with Amazon.
Second one from Start of May until mid-July. Just been replaced through Screwfix - great service from them, no quibbling.
Hoping for the best with this one. None were heavily used. It’s a shame as Dremel was a byword for quality.

Do not buy the dremel 3000.
Now just binned my 4th one .
Same wire that goes to the 4 connection points.
Hardly used mine only 3 months old absolute waste of time to send it away.
Really hope Bosch will end production of this useless piece of ????

Brought a Dremel 3000 from Screwfix did one job and then went to use it again just over a year later and it would not work.phone Bosch to try to get it repaired. They said it wasn’t worth it and best buy another. Would never buy another Dremel as really poor quality

I purchased a Dremmel 4000, the motor burned out just before the warranty period ended. It had hardly been used and was quickly replaced by Bosch Service Centre. The replacement, has just done the same thing. Again it had hardly been used, but sadly, this time outside warranty. In my view a really poor product, not fit for purpose.

I am done with dremel. Waste of money and time. Never again dremel x 3…Done, Ed
Edit-I did not know dremel was part of bosch…I own a bosch jigsaw and drilll…they are both very poor tools. Never again.In the UK, all of my contractor Friends use DeWalt, Milwaukee, Festool, Makita…Bosch = Hard No.

Now on my THIRD 4250 drill and again it's starting to badly stutter. Only an hour or so use if that !, tried my best to keep dust out of the vents too. It's clearly very poor quality and to be avoided.

Very poor company from what it used to be. Been using these for 10years plus and now the newer models don't last 5 minutes (32day the last one lasted) won't take any of there old units back without hassel and just hang up the phone on you. Very annoying and unfortunate

Dremel 3000 is an absolute rubbish. The first time it last 15 mins and i was even putting pressure on it when cutting PVC sheet. If it cant cut even a feet of PVC, and you claim it can even cut metal??? Come on! The shop owner said i should have let it have some breaks between cuts which i did and put at speed 9 when cutting which i later did. Next, i did just that after repairs and it it lasted less than an hour before dying. You know what? Keep the warranty. I can keep returning to the shop for all of this. I went and bought a die grinder from Ingcoa and been having an absolute blast with the beast. Even my cheap hand drill fitted with a dremel wheel cutter can do a better job of cutting with no risk of dying out. Dremel deserve a true boycott, they just hide behind their brand. Buying other brands is better because you know they will work better than this POS. Dremel, never again.

Dremel 4000 got hot and stopped after use and had it replaced. The replacement has done the same. Work was light and should not have been a problem. Tried to contact Dremel and it was no good.

The dremal digilab 3d45 stopped working completely after around 450 prints which is terrible for a 2 THOUSAND dollar printer. Don’t buy there junk, they’ll just convince you too buy a bunch of replacement parts for their junk printers. They tried too sell me a gear for 25$ and a motor assembly for 70$ absurd pricing for a printer you already have to spend thousands on just to obtain. Now I’m stuck with a broken printer and nobody too help me fix it because nobody sells replacements for driver boards and motherboards for reasonable prices.

Purchased Dremel 8220 multitool kit in May 2021, have used the tool just three times and the unit has failed. It is now just out of two year warranty and am told a repair would be more than a new unit - what a piece of rubbish - DON'T BUY DREMEL

Dremel 3000. Failed after first use. Checked the internet for know issues and came across the broken armature wire issue. Sure enough, that was the problem. I managed to fix it, but looking at how those connections are made I know it is only a matter of time before it or one of the other 3 fail again in the same way. An appalling piece of design.

Junk junk! First couldn't get the bit to come out so sent it back and looks like they pressed the blue button down with channel locks and got it out then they kept my bit and sent the same piece of crap back. Now have the same problem again. Also the sanding bits work for 30 seconds and fly off. This is a Mickey mouse tool junk

I have brought Dremel multi tools for a long time. my old 3000 I have had for about 5 years, But my other 3 the 8220,the 4250,the other cant remember the number have all burnt out the latest today, I will no longer pay for a name going to buy a cheap whatever Dremel never again